KOBOLD Instruments Inc • 1801 Parkway View Drive • 15205 Pittsburgh, PA • Tel: +1 412 788 2830 • E-mail: Please activate JavaScript visit koboldusa.com

mim1-durchfluss.png: Magnetic Inductive Flowmeter (Flow Meter) - All Metal - Stainless Steel - MIM

Magnetic Inductive Flowmeter (Flow Meter) - All Metal - Stainless Steel - MIM

Measuring range: 0.01 - 1 l/min ... 1.5 - 350 l/min liquids
Accuracy: ±(0.8% of reading + 0.5% of FS)
pmax: 16 bar
tmax: +140°C
Connection: G ¼, G ½, G ¾, G 1, G 2, 2" NPT (various adapters)
Material: stainless steel, PEEK
Output: 2x analogue, pulse, frequency, alarm or IO-Link
Input: 1x control input
integrated PT1000, dosing function, rotatable TFT display, bidirectional measurement, part- and grand totalizer, stainless steel design, usable even with hand gloves

Promotional Video




application/pdf; charset=binary


1,0 MB

Operating Instructions

application/pdf; charset=binary

MIM - Operating Instructions

3,1 MB
application/pdf; charset=binary

MIM - Bedienungsanleitung

2,9 MB


The new flowmeter MIM was developed for measuring and monitoring smaller- and medium-sized flow of conductive liquids in pipes.
The device operates according to the electromagnetic measurement principle. According to Faraday’s Law of magnetic induction a voltage is induced in a conductor moving through a magnetic field. The electrically conductive measuring agent acts as the moved conductor. The voltage induced in the measuring agent is proportional to the flow velocity and is therefore a value for the volumetric flow.
The flowing media must have a minimum conductivity. The induced voltage is picked up by two sensing electrodes which are in contact with the measuring agent and sent to the measuring amplifier. The flow rate will be calculated based on the cross-sectional area of the pipe. The measurement is not depending on the process liquid and its material properties such as density, viscosity and temperature.
Two given outputs can be set to be switch, analogue or frequency. Also a dosing function can be selected, where output 1 is set as switch NPN / PNP / PP and output 2 is set as control input.

Other Members of the KOBOLD group

Products by Keyword

By using this website you consent to the use of cookies. Further information can be found in our data privacy statement.